BQ body bags made in TNT with handles
CODE
MBBT020
INFORMATION
- Manufactured from 90g Nonwoven (TNT) fabric
- 1 central opening zip.
- Water repellent Nonwoven (TNT) material.
- Six reinforced handles.
- Weight limit: 140 kg static load.
TECHNICAL DATA
MEASUREMENTS
L: 210 cm
W: 53 cm
H: 35 cm
COLOURS
Standard White and Black TNT Material.
PACKAGING
Carton box.
Optional: individually packed on demand
INTENDED USE
Recovery body bags intended to be used to recover and transport a human body.
The Nonwoven (TNT) material provides a water repellent protection to the preliminary body fluids release, however after a certain period of time there could be leakage if body fluids.
In the event the corpse is releasing fluids and the bag with the corpse is transported vertically, it is important to fold the short sides of the bag toward the centre to prevent the fluids to reach the top zip and the upper corner sewings.
Same approach above should be used if the corpse height is substantially less than average human stature.
Possible leakage in the proximity of the zips if the correct use guidelines are disregarded.
CORRECT USE
To be used in horizontally.
There is no stitching on the bottom, side or corners of the body bag, therefore if the bag is kept in an horizontal position and so that fluid is prevented from contacting the upper zip, there should be no leakage.
It is recommended to fold up the lower part of the bag in order to allow body fluids to remain centrally distributed inside the bag.
it is important to fold the short sides of the bag toward the centre to prevent the fluids from reaching the upper corner seams.
Same approach above should be used if the corpse height is substantially less than average human stature.
Make sure the entire bag sits flat on the horizontal surface.
Try to avoid the event that by gravity the bag sides are dropping below the body horizontal level.
Do not puncture or tear the body bag.
