Polyethylene Sleeve Bag

SH-Body bags_1_Med.png
P_P_B_MBBT101.png
P_P_LD_MBBT010.png

CODE

MBBSL10

INFORMATION

- Manufactured in Polyethylene MY60.
- 6cm adhesive flap on the top side.
- No handles.
- Suitable to be integrated in Nonwoven (TNT) bags.

TECHNICAL DATA

MEASUREMENTS

L: 220 cm
W: 80 cm

COLOURS

Transparent

PACKAGING

10 items per packaging

INTENDED USE

Body bag's inner sleeve, intended to be used to store a human body inside a Novwoven (TNT) body bag or as additional protection against body fluid release.
Polyethylene MY60 is a waterproof material, therefore there should be no leakage on bottom, side and top area.
There is a foreseeable possibility of leakage from the two upper 6cm sides of the upper flap

CORRECT USE

To be used horizontally.
There is no stitching on the bottom, side or corners of the body bag, therefore if the bag is kept in an horizontal position and so that fluid is prevented from contacting the upper zip, there should be no leakage.
It is recommended to fold up the lower part of the bag in order to allow body fluids to remain centrally distributed inside the bag.
it is important to fold the short sides of the bag toward the centre to prevent the fluids from reaching the upper corner seams.
Same approach above should be used if the corpse height is substantially less than average human stature.
Make sure the entire bag sits flat on the horizontal surface.
Do not puncture or tear the body bag.

©2020 by Bi Quadro. Proudly created with Wix.com