BQ body bags made in NYLON and TNT

SH-Body bags_1_Med.png
P_P_B_MBBT101.png
P_P_LD_MBBT010.png
P_P_BD6_MBBP020-PVC and TNT.png

CODE

MBBP030

INFORMATION

- Top, bottom and sides: Nylon 110 coated PU+WR fabric.
- Top central band with zip: Nonwoven (TNT) 90 gr fabric.
- 1 central opening zip.
- Reinforced seams, reduces risk of odour and leaks.
- No handles.
- Waterproof Nylon material.
- Water repellent Nonwoven material.
- 6+6 cm TNT zip flap with central zip
- Weight limit: 180 kg

TECHNICAL DATA

MEASUREMENTS

L: 208 cm
W: 54 cm
H: 24 cm

COLOURS

Standard White and Black TNT Material.
Other TNT colours are available according to colour palette.
Nylon colours are available according to colour palette.

PACKAGING

5 items per packaging

INTENDED USE

Recovery body bags intended to be used to recover and transport a human body.
The Nylon material guarantees a waterproof protection, the Nonwoven (TNT) material provides a water repellent protection, however after a certain period of time there could be leakage if body fluids are in contact with the zips or the upper Nonwoven (TNT) material.
Possible leakage in the proximity of the zips if the correct use guidelines are disregarded.

CORRECT USE

To be used horizontally.
There is no stitching on the bottom, side or corners of the body bag, therefore if the bag is kept in an horizontal position and so that fluid is prevented from contacting the upper zip, there should be no leakage.
It is recommended to fold up the lower part of the bag in order to allow body fluids to remain centrally distributed inside the bag.
it is important to fold the short sides of the bag toward the centre to prevent the fluids from reaching the upper corner seams.
Same approach above should be used if the corpse height is substantially less than average human stature.
Make sure the entire bag sits flat on the horizontal surface.
Do not puncture or tear the body bag.

©2020 by Bi Quadro. Proudly created with Wix.com