BQ Laminated Polypropylene bag

SH-Body bags_1_Med.png
P_P_BD6_MBBP020-PVC and TNT.png




- Manufactured with 100% laminated Polypropylene.
- Zips along 3 sides.
- Raised angles to create a "tub".
- No seams on the bottom of the bag.
- Limited and essential amount of seams to reduce possibility of leakage.
- Six reinforced handles.
- Waterproof material.
- Option of PVC transparent pocket.
- Weight limit: 180 kg.



L: 225 cm
W: 82 cm


Standard White.
Any other colour is available according to colour palette.


Individually packed


Recovery body bags with its "tub" design is intended to be used to recover and transport a human body.
The Polypropylene material guarantees a waterproof protection, however after a certain period of time there could be leakage if body fluids are in contact with the zips or seams.
Possible leakage in the proximity of the zips if the correct use guidelines are disregarded.
Seams and zips are not waterproof.


To be used horizontally.
There is no stitching on the bottom of the body bag, therefore if the bag is kept in an horizontal position and so that fluid is prevented from contacting the upper zip, there should be no leakage.
It is recommended to fold up the lower part of the bag in order to allow body fluids to remain centrally distributed inside the bag.
It is important to fold the short sides of the bag toward the centre to prevent the fluids from reaching the upper corner seams.
Same approach above should be used if the corpse height is substantially less than average human stature.
Make sure the entire bag sits flat on the horizontal surface.
Try to avoid the event that by gravity the bag sides are dropping below the body horizontal level.
Do not puncture or tear the body bag.

©2020 by Bi Quadro. Proudly created with