BQ Heavy Duty body bags made in PVC

SH-Body bags_1_Med.png
P_P_B_MBBT101.png
P_P_LD_MBBT010.png
P_P_BD6_MBBP020-PVC and TNT.png
P_P_BD8_MBBP010-PVC.png

CODE

MBBP010

INFORMATION

- Manufactured with High Density 600 x 600 reinforced PVC.
- Zips along 3 sides.
- Reinforced seams, reduces risk of odour and leaks.
- Six reinforced handles.
- Waterproof material
- Option of PVC transparent pocket
- Weight limit: 180 kg

TECHNICAL DATA

MEASUREMENTS

L: 220 cm
W: 85 cm

COLOURS

Standard Blue and Black.
Any other colour is available according to colour palette.

PACKAGING

Individually packed

INTENDED USE

Recovery body bags intended to be used to recover and transport a human body
The PVC material guarantees a waterproof protection, however after a certain period of time there could be leakage if body fluids are in contact with the zips.
Possible leakage in the proximity of the zips if the correct use guidelines are disregarded.

CORRECT USE

To be used horizontally.
There is no stitching on the bottom, side or corners of the body bag, therefore if the bag is kept in an horizontal position and so that fluid is prevented from contacting the upper zip, there should be no leakage.
It is recommended to fold up the lower part of the bag in order to allow body fluids to remain centrally distributed inside the bag.
it is important to fold the short sides of the bag toward the centre to prevent the fluids from reaching the upper corner seams.
Same approach above should be used if the corpse height is substantially less than average human stature.
Make sure the entire bag sits flat on the horizontal surface.
Try to avoid the event that by gravity the bag sides are dropping below the body horizontal level.
Do not puncture or tear the body bag.

©2020 by Bi Quadro. Proudly created with Wix.com