BQ Body Bag in Biodegradable Mater-BI

SH-Body bags_1_Med.png
P_P_B_MBBT101.png
P_P_LD_MBBT010.png
P_P_BD6_MBBP020-PVC and TNT.png
P_P_BD8_MBBP010-PVC.png

CODE

MBBMB10

INFORMATION

- Manufactured in certified Marter-BI Biodegradable material.
- 1 side opening zip (non-biodegradable).
- No handles.
- Suitable for body transportation for max 100 km

TECHNICAL DATA

MEASUREMENTS

L: 260 cm
W: 90 cm
Thickness: 39/40 um

COLOURS

Milky white

PACKAGING

10 items per packaging

INTENDED USE

Body bags intended to be used to store a human body inside a coffin or a burying container and to gradually degrade.
The Mater-BI provides a waterproof protection for a limited amount of time to protect the initial body fluids release, however after a short/medium period of time there could be leakage.
The resistance of the Mater-Bi bag is related to many environmental factors, in general it is recommended not to transport bodies inside the bag for a distance further than 100km.

CORRECT USE

To be used horizontally.
There is no stitching on the bottom, side or corners of the body bag, therefore if the bag is kept in an horizontal position and so that fluid is prevented from contacting the upper zip, there should be no leakage.
It is recommended to fold up the lower part of the bag in order to allow body fluids to remain centrally distributed inside the bag.
it is important to fold the short sides of the bag toward the centre to prevent the fluids from reaching the upper corner seams.
Same approach above should be used if the corpse height is substantially less than average human stature.
Make sure the entire bag sits flat on the horizontal surface.
Do not puncture or tear the body bag.

©2020 by Bi Quadro. Proudly created with Wix.com